Will set up base on Victron 100/50 model and SOK12V100 model
1) open to VictronConnect App and choose the MTTP Model.
2) inside click on the settings wheel in the upper right hand corner
3) select the top line that says “Battery” and your settings are right there. Change “Battery Preset from “Rotary Switch” to “User Defined“. Now set it up like this:
Absorption Voltage = 14.6v
Float Voltage = 13.8v
Equalization Voltage = 14.4v (We actually want Equalization Time to be set to zero. That is done under “Expert Mode“).
Automatic Equalization should be set to “Disabled” as should Temperature Compensation and Low Temperature Cut Off.
4)Slide the “Expert Mode” slider over and set it up like this:
Now set the Maximum absorption time to 30 minutes per battery that you have.
Make sure automatic equalization is disabled.
Make sure Equalization duration is set to 0 minutes.
Thanks for the detailed guide! It’s super helpful for someone new to setting up the Victron MPPT and SOK battery combo. Adjusting the absorption voltage to 14.6v is such an important detail that many might overlook. I’ve recently been tinkering with solar setups myself, so seeing step-by-step instructions like these is great. By the way, while researching solar gear, I came across Snow Rider 3D – not related to batteries, but a fun game I turned to when I needed a break from setups! Funny how these little distractions can keep us balanced. Anyway, thanks again for sharing such valuable information!