Set up Victron BMV-712 Battery Monitor and SK12V100

Will set up Victron BMV-712 Battery Monitor and SK12V100

1)Open Victron Connect, connect to the BMV battery monitor. Click on the settings wheel

2)

• Battery Capacity: Total Ah of your bank of batteries

• Charged voltage: 14.4V but note that this number should be about .1 or .2 volts below the charging voltage set in your charging device

• Discharge Floor: 0%

• Tail Current: 2-4% is good

• Charged Detection Time: 3m

• Peukert Exponent: 1.05

• Charge Efficiency Factor: 99%

• Current threshold: 0.10A

• Time to go averaging period 3m

• Battery Starts Synchronized: blue button should be to the right

• State of Charge: leave alone

• Synchronize SOC to 100%: Leave alone, this device will sync itself at the top of the charge

• Zero Current Calibration: Leave alone